Cast-in-place 90 degree Conduit Bracket Makes Supporting Electrical Stub-up Easy
CONDUIT STUB-UP SUPPORT
- Easy side entry
- For flexible or rigid conduit
- Cable tie to secure conduit
- Interlocking feet for multi-run alignment
- Also supports single run
- Fasten to form deck with fasteners
- Secure to ground with rebar
- Made of reinforced polypropylene
- Temp range after installation -10F +190 F
- Load Rating 25 lbs
Common Applications
- Horzontal run to vertical stub-up
- Cast-in-place conduit isolation and support
- In-slab installation at ground-work with rebar or wood decking
This electrical conduit stub-up support is built to hold electrical conduit vertically during the slab pour. They snap together to create even rows as the conduit exits the concrete. They can supports electrical conduit up to 1-1/4″ IPS in a 90 degree pattern. Ideal for positioning in-slab conduit prior to concrete slab pouring. For elevated slabs, nail or screw bracket to form decking or edge form. For slab-on-grade (ground work), secure bracket with #4 rebar driven into the ground. Conduit is attached to bracket with zip ties. (included)
PART
CONDUIT SIZE
CONDUIT/PIPE SUPPORT
CTN. QTY
DIMENSIONS
707
3/8 in.-7/8 in. O.D.
1
25
8-1/2 in. x 8-5/8 in. x 1-1/4 in.
707E
3/8 in.-1-1/2 in. O.D.
2
25
8-1/2 in. x 8-5/8 in. x 1-1/4 in.
708
3/8 in.-1-1/8 in. O.D.
3
15
10-1/2 in. x 11-1/8 in. x 2-1/2 in.
708E
3/8 in.-2-1/2 in. O.D.
4
15
10-1/2 in. x 11-1/6 in. x 3-1/4 in